Domestic demand-side response with heat pumps: controls and tariffs

ABSTRACT

Electric heat pumps feature prominently in projected energy transitions in the UK and elsewhere. Owing to their high electricity consumption, heat pumps are viewed as important targets for demand-side response (DSR). Findings are presented from a field trial of a new control system that aims to optimize heat pump performance, including under time-varying tariff conditions. The trial involved monitoring 76 properties with heat pumps, but without dedicated heat storage; 31 of these received the control system. Interviews were conducted with a subsample of 12 participants. The controller successfully evened out electricity demand over the day (reducing the evening peak), but this was associated with increased late night and daytime temperatures. Interview participants reported some disturbance owing to overnight heating and noise, as well as usability issues with the controller interface and hardware. These issues present risks to the future acceptability of such systems. While the system delivered short-term demand reductions successfully, longer-term demand shifting risked causing unacceptable disturbance to occupants. Future control systems could overcome some of the issues identified in this pioneering trial through more effective zoning, using temperature caps or installing dedicated heat storage, but these may either limit the available flexibility or be challenging to achieve.     

基于(火用)效率目标的环冷机余热回收系统操作参数优化

摘要：针对烧结环冷机余热回收利用率不高的难题，采用分析法建立了评价某钢铁厂烧结环冷机余热回收系统运行效率的效率模型。基于多孔介质模型、局部非热平衡方程、真实气体SRK方程建立环冷机内气固两相换热模型。通过CFD仿真模拟，探究料层高度、循环风机输入烟气温度、烧结矿底部入口风速三项可控环冷机运行工艺参数对系统效率的影响规律。结果表明，料层厚度在1～1.5 m区间每增加0.1 m，效率增加0.8%～1.1%；循环风温在100～140℃之间每增加10℃，效率增加1.4%～1.5%；烧结矿底部入口风速在0.9～1.9 m/s之间每增加0.1 m/s，效率降低0.18%～0.24%。在此基础上，基于工业运行数据建立效率正交试验优化模型，提高了该余热回收系统3.42%的效率。     

Thermodiffusion‐Assisted Pyroelectrics—Enabling Rapid and Stable Heat and Radiation Sensing

Sensors for monitoring temperature, heat flux, and thermal radiation are essential for applications such as electronic skin. While pyroelectric and thermoelectric effects are suitable candidates as functional elements in such devices, both concepts show individual drawbacks in terms of zero equilibrium signals for pyroelectric materials and small or slow response of thermoelectric materials. Here, these drawbacks are overcome by introducing the concept of thermodiffusion‐assisted pyroelectrics, which combines and enhances the performance of pyroelectric and ionic thermoelectric materials. The presented integrated concept provides both rapid initial response upon heating and stable synergistically enhanced signals upon prolonged exposure to heat stimuli. Likewise, incorporation of plasmonic metasurfaces enables the concept to provide both rapid and stable signals for radiation‐induced heating. The performance of the concept and its working mechanism can be explained by ion–electron interactions at the interface between the pyroelectric and ionic thermoelectric materials.     

Effect of Operating Parameters on Gas‐Solid Hydrodynamics and Heat Transfer in a Spouted Bed

Through a combined computational fluid dynamics and discrete element method approach, the effect of the operating parameters on the hydrodynamics and heat‐transfer properties of gas‐solid two‐phase flows in a spouted bed are extensively investigated. Considering the high velocity in the fountain region, gas turbulence is resolved by employing the large‐eddy simulation. The rolling friction model is adopted for more precise predictions of solid behavior near the wall. Subsequently, the gas‐solid flow patterns, gas‐solid velocities, and temperature evolution are investigated. Moreover, different operating conditions and geometry configurations are evaluated with respect to heat‐transfer performance. The results provide a fundamental understanding of heat‐transfer mechanisms in spouted beds.     

氨基磺酸盐型水性醋酸纤维乳液的制备与性能

采用乙二胺基乙磺酸钠(AAS)作为亲水剂,在二月桂酸二丁基锡(DBTDL)的催化下,通过异佛尔酮二异氰酸酯(IPDI)将亲水基引入二醋酸纤维(CA)分子中,制得了一种氨基磺酸盐型水性醋酸纤维乳液(SWCA)。利用FTIR、DLS、黏度计、TEM、SEM、接触角测量仪、XRD、TGA,对SWCA结构及涂膜性能进行表征。考察了IPDI与AAS物质的量比对SWCA乳液粒径、黏度、涂膜表观形貌及耐水性的影响。结果表明:当n(IPDI)∶n(AAS)=1.1∶1时,乳液最稳定,微观形态呈水包油型(O/W)核壳结构,乳液粒径和分散系数(PDI)最小,分别为128nm和0.112,此时乳液表观黏度最大,为73.5m Pa·s,所成涂膜致密平整,接触角可达110.2°±2°,表现出明显的疏水性;此外,与二醋酸纤维相比,SWCA涂膜结晶性减弱,呈微晶态或次晶态结构,且具有较好的耐热性。     

环形通道内液态铅铋合金流动换热特性实验研究

通过对环形通道内液态铅铋合金的流动换热特性进行实验研究，得到了气泡泵注气对液态金属流动的影响，并拟合出环形通道内液态铅铋合金的摩擦系数关系式和换热特性关系式。结果表明：采用气泡泵注气能有效提升铅铋合金的质量流速；相同Reynolds数下环形通道内液态铅铋合金的摩擦系数大于由布拉休斯公式计算得到的摩擦系数；液态铅铋合金对流换热过程中，导热项占主导地位，并且Nusselt数随Peclet数的增大而增大。     

Nonreciprocal properties of 1D magnetized plasma photonic crystals with the Fibonacci sequence

In this paper, the nonreciprocal properties of a novel kind of 1D magnetized plasma photonic crystals(MPPCs) with the Fibonacci sequence are investigated. The isolation of the proposed 1D MPPCs is also used to analyze the nonreciprocal properties. Compared to the conventional 1D MPPCs with periodic structure, the nonreciprocal performance can be significantly improved.The effects of several parameters of the proposed 1D MPPCs on the nonreciprocal properties are studied by the transfer matrix method, which includes the incident angle, order of the Fibonacci sequence, plasma frequency, plasma cyclotron frequency and plasma filling factor. The obtained results show that the nonreciprocal propagation properties can be improved by increasing the values of the plasma cyclotron frequency and incident angle, but they will worsen by blindly increasing the order of the Fibonacci sequence, plasma frequency and filling factor of plasma.The peaks of transmittance also are obviously reduced. In addition, the value of isolation will increase with increasing the incident angle, order of Fibonacci sequence, plasma frequency and plasma filling factor. However, when the plasma cyclotron frequency is increased, the value of isolation will be increased at lower frequencies, but is almost unchanged at higher frequencies.     

Modulated gravity effects on nonlinear convection in viscoelastic ferromagnetic fluids between two horizontal parallel plates

In this study, the analysis of nonlinear stability with viscoelastic ferromagnetic fluids as working media is performed by finite-amplitude perturbations. The solution of the resulting nonautonomous system of the Lorenz model (generalized Khayat–Lorenz model of four modes) is obtained numerically to measure the amount of heat transport. The effects of elastic parameters, Prandtl number, modulation parameters, buoyancy magnetic parameter, and nonbuoyancy magnetic parameter on heat transport are studied. Heat transport is quantified through the average Nusselt number, which is determined by solving the scaled Lorenz model. As limiting cases of the study, the results of Newtonian, Maxwell, Rivlin–Ericksen fluids are determined. The results obtained have been presented graphically.     

硅酸盐水泥基胶凝材料体系水化热计算研究

基于传统水化热模型计算水泥水化热,建立矿物掺合料水化热计算公式;采用直接法测定掺粉煤灰、矿渣条件下普通硅酸盐水泥和低热水泥基胶凝材料体系1~7 d水化热。计算结果与实测结果对比表明:矿物掺和料水化热双指数计算公式可表征普通硅酸盐水泥和低热水泥基胶凝材料体系下粉煤灰和矿渣1~7 d水化热,可采用此法结合水泥水化热计算方法进行以水化热作为目标函数的胶凝材料体系优化设计。